21 Jewel Waltham Crescent Street Railroad Pocket Watch 16-Size Up/Down Indicator

21 Jewel Waltham Crescent Street Railroad Pocket Watch 16-Size Up/Down Indicator

RR102016-18TE
$1,300.00
21 Jewel Waltham Crescent Street Railroad Pocket Watch 16-Size Up/Down Indicator
Processing...

21 Jewel Waltham Crescent Street Railroad Pocket Watch 16-Size Up/Down Indicator

RR102016-18TE
$1,300.00

1 available for immediate delivery

Product Details


Waltham 21-Jewel “Crescent Street” Man’s 16-Size Up/Down Indicator Railroad Pocket Watch
U.S.; Waltham; Man’s; Serial# 20,314,423; C. 1915
CASE: The green gold-filled, 16-size, No. 7,058,876, plain polished case has an open face and is signed “Waltham”.
DIAL: This off white metal, double sunk dial displays Arabic numerals, spade hands and is signed “Waltham”.
MOVT: This 21-jewel, lever-set, No. 20,314,423 movement has 5-adjustments with lever escapement is nickel with a bridge style layout and is signed “Waltham”. Marked “20314423, Crescent St. Waltham Mass., 21 Jewels, Adjusted to 5 Positions”. 
COND:
C 3 (The case is in very good condition)
D 3 (The dial is in very good condition)
M 3 (The movement is in very good condition)
Expert’s Opinion: “Crescent Street” 21-Jewel, wind indicator, adjusted, solid gold center wheel, factory metal, enamel dial and J. Boss green gold-filled railroad case. The watch was timed and cased at the Waltham Factory and is triple signed “Waltham”. TE

Stem-wind, Lever-Set Movements
Mandatory for all railroad watches after roughly 1908, this kind of pocket watch was set by opening the crystal and bezel and pulling out the setting-lever (most hunter cases have levers accessible without removing the crystal or bezel), which was generally found at either the 10 or 2 o'clock positions on open-faced watches, and at 5:00 on hunting cased watches. Once the lever was pulled out, the crown could be turned to set the time. The lever was then pushed back in and the crystal and bezel were closed over the dial again. This method of time setting on pocket watches was preferred by American and Canadian railroads, as lever setting watches make accidental time changes impossible. After 1908, lever setting was generally required for new watches entering service on American railroads.

Lever Escapement
An escapement is a device in mechanical watches and clocks that transfers energy to the timekeeping element (the "impulse action") and allows the number of its oscillations to be counted (the "locking action"). The impulse action transfers energy to the clock's timekeeping element (usually a pendulum or balance wheel) to replace the energy lost to friction during its cycle and keep the timekeeper oscillating. The escapement is driven by force from a coiled spring or a suspended weight, transmitted through the timepiece's gear train. Each swing of the pendulum or balance wheel releases a tooth of the escapement's escape wheel gear, allowing the clock's gear train to advance or "escape" by a fixed amount. This regular periodic advancement moves the clock's hands forward at a steady rate. At the same time the tooth gives the timekeeping element a push, before another tooth catches on the escapement's pallet, returning the escapement to its "locked" state. The sudden stopping of the escapement's tooth is what generates the characteristic "ticking" sound heard in operating mechanical clocks and watches.

Adjustments
Watch adjustment is the process of correcting those errors in the watch that cause variation in time keeping. These include temperature influences, variation in driving power and position of the watch with respect to mechanism such as pendant up or dial up.

Watches with better calibre movements will have been adjusted at the factory for a number of positions. The usual array of positions include a subset of the following positions:
1. Dial up 2. Dial down 3. Bow up 4. Bow down (Not required by Railroad) 5. Bow left 6. Bow right

These positional adjustments are intended to insure that the watch is just as reliable and accurate regardless of the position in which it is stored or used.

The general rule of thumb with adjustments is that more is better. However, for average every day use, a typical unadjusted watch was perfectly adequate.